WELCOME TO C&H BEARING WEBSITE! C&H BEARING C&H
EN
0086-21-58356710
[email protected]
PRODUCTS
INDUSTRIES
RESOURCES
ABOUT US
CONTACT US
Metric rod ends maintenance free

C&H manufactures maintenance-free rod ends with three different sliding contact surface combinations in different series:
• Steel/PTFE composite
• Steel/PTFE fabric
• Steel/PTFE Plastic
Rod ends with either a steel/PTFE composite or steel/PTFE fabric sliding contact surface combination contain a bearing from the standard assortment. The outer ring is staked in place in the housing.
Rod ends with a steel/PTFE plastic sliding contact surface combination consist of a rod end housing and a spherical plain bearing inner ring. Between the housing and the inner ring, a sliding layer of fibre reinforced polymer, containing PTFE, is molded to the housing.
C&H supplies maintenance-free rod ends with a threaded shank with a right-hand thread as standard. All rod ends are also available with a left-hand thread. They are identified by the designation prefix or suffix L .

PRODUCT FILTERS AND TABLE

Bore diameter (mm)

~

Head diameter (mm)

~

Ball width (mm)

~

Sliding contact surface
Hard chromium/PTFE composite
Hard chromium/PTFE fabric
Hard chromium/PTFE plastic
Stainless steel/PTFE composite
Stainless steel/PTFE fabric
Material housing
Carbon steel
Stainless steel
Alloy steel
Material ball
Bearing steel
Stainless steel
Sealing
Without
2RS-Lip seals on both sides
Thread gender
Female
Male
Thread direction
Right-hand
Left-hand
Designation

Interchange code

RESET ALL
FILTERS
Toggle ： Metric Imperial   Sort By :
Designation Bore diameter Head diameter Ball width Thread size Head width Tilt angle Basic dynamic load rating Basic static load rating
d d2 B G C1 α° C C0
mm
mm
mm
mm
°
kN
kN
GIPL10PW 10 28 14 M10x1.25 10.5 14 18 18.5
GIKL5PW 5 18 8 M5x0.8 6 13 6 9.18
GIKR5PW 5 18 8 M5x0.8 6 13 6 9.18
GIPR5PW 5 18 8 M4x0.7 6 13 6 9.18
GIKR6PW 6 20 9 M6x1 6.75 13 7.65 8
GIKR8PW 8 24 12 M8x1.25 9 14 12.9 13.1
GIKR10PW 10 28 14 M10x1.5 10.5 14 18 18.5
GIR80-1UK-2RS 80 180 55 M80×4 47 6 400 600
GIR80UK-2RS 80 180 55 M64×4 47 6 705 750
GAR80UK-2RS 80 180 55 M64×4 47 6 705 750
GIR50-1UK-2RS 50 112 35 M52×3 30 6 156 260
GIR60-1UK-2RS 60 135 44 M60×4 38 6 245 300
GIR60UK-2RS 60 135 44 M52×3 38 6 430 450
GIR70-1UK-2RS 70 160 49 M72×4 42 6 313 470
GIR70UK-2RS 70 160 49 M56×4 42 6 550 610
GAR70UK-2RS 70 160 49 M56×4 42 6 550 610
GAR80-1UK-2RS 80 180 55 M64×4 47 6 705 750
GAR70-1UK-2RS 70 160 49 M72×4 42 6 313 610
GIL70-1UK-2RS 70 160 49 M72×4 42 6 313 470
GIL80-1UK-2RS 80 180 55 M80×4 47 6 400 600
GIL80UK-2RS 80 180 55 M64×4 47 6 705 750
GAL80UK-2RS 80 180 55 M64×4 47 6 705 750
GAL70-1UK-2RS 70 160 49 M72×4 42 6 313 610
GAL80-1UK-2RS 80 180 55 M80×4 47 6 400 750
MXML16 16 38 21 M16X2.0 14.25 23 97.71
MXML14 14 34.75 19 M14X2.0 13.5 21 90.38
MXML12 12 30 16 M12X1.75 12 17 68.14
MXML10 10 27 14 M10X1.5 10.5 17 52.47
MXML8 8 22.25 12 M8X1.25 8.75 18 33.11
MXML6 6 19 9 M6X1.0 7 13 18.18
GIPL10PW
d Bore diameter 10 mm
d2 Head diameter 28 mm
B Ball width 14 mm
G Thread size M10x1.25
C1 Head width 10.5 mm
α° Tilt angle 14 °
C Basic dynamic load rating 18 kN
C0 Basic static load rating 18.5 kN
GIKL5PW
d Bore diameter 5 mm
d2 Head diameter 18 mm
B Ball width 8 mm
G Thread size M5x0.8
C1 Head width 6 mm
α° Tilt angle 13 °
C Basic dynamic load rating 6 kN
C0 Basic static load rating 9.18 kN
GIKR5PW
d Bore diameter 5 mm
d2 Head diameter 18 mm
B Ball width 8 mm
G Thread size M5x0.8
C1 Head width 6 mm
α° Tilt angle 13 °
C Basic dynamic load rating 6 kN
C0 Basic static load rating 9.18 kN
GIPR5PW
d Bore diameter 5 mm
d2 Head diameter 18 mm
B Ball width 8 mm
G Thread size M4x0.7
C1 Head width 6 mm
α° Tilt angle 13 °
C Basic dynamic load rating 6 kN
C0 Basic static load rating 9.18 kN
GIKR6PW
d Bore diameter 6 mm
d2 Head diameter 20 mm
B Ball width 9 mm
G Thread size M6x1
C1 Head width 6.75 mm
α° Tilt angle 13 °
C Basic dynamic load rating 7.65 kN
C0 Basic static load rating 8 kN
GIKR8PW
d Bore diameter 8 mm
d2 Head diameter 24 mm
B Ball width 12 mm
G Thread size M8x1.25
C1 Head width 9 mm
α° Tilt angle 14 °
C Basic dynamic load rating 12.9 kN
C0 Basic static load rating 13.1 kN
GIKR10PW
d Bore diameter 10 mm
d2 Head diameter 28 mm
B Ball width 14 mm
G Thread size M10x1.5
C1 Head width 10.5 mm
α° Tilt angle 14 °
C Basic dynamic load rating 18 kN
C0 Basic static load rating 18.5 kN
GIR80-1UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M80×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 400 kN
C0 Basic static load rating 600 kN
GIR80UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M64×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 705 kN
C0 Basic static load rating 750 kN
GAR80UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M64×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 705 kN
C0 Basic static load rating 750 kN
GIR50-1UK-2RS
d Bore diameter 50 mm
d2 Head diameter 112 mm
B Ball width 35 mm
G Thread size M52×3
C1 Head width 30 mm
α° Tilt angle 6 °
C Basic dynamic load rating 156 kN
C0 Basic static load rating 260 kN
GIR60-1UK-2RS
d Bore diameter 60 mm
d2 Head diameter 135 mm
B Ball width 44 mm
G Thread size M60×4
C1 Head width 38 mm
α° Tilt angle 6 °
C Basic dynamic load rating 245 kN
C0 Basic static load rating 300 kN
GIR60UK-2RS
d Bore diameter 60 mm
d2 Head diameter 135 mm
B Ball width 44 mm
G Thread size M52×3
C1 Head width 38 mm
α° Tilt angle 6 °
C Basic dynamic load rating 430 kN
C0 Basic static load rating 450 kN
GIR70-1UK-2RS
d Bore diameter 70 mm
d2 Head diameter 160 mm
B Ball width 49 mm
G Thread size M72×4
C1 Head width 42 mm
α° Tilt angle 6 °
C Basic dynamic load rating 313 kN
C0 Basic static load rating 470 kN
GIR70UK-2RS
d Bore diameter 70 mm
d2 Head diameter 160 mm
B Ball width 49 mm
G Thread size M56×4
C1 Head width 42 mm
α° Tilt angle 6 °
C Basic dynamic load rating 550 kN
C0 Basic static load rating 610 kN
GAR70UK-2RS
d Bore diameter 70 mm
d2 Head diameter 160 mm
B Ball width 49 mm
G Thread size M56×4
C1 Head width 42 mm
α° Tilt angle 6 °
C Basic dynamic load rating 550 kN
C0 Basic static load rating 610 kN
GAR80-1UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M64×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 705 kN
C0 Basic static load rating 750 kN
GAR70-1UK-2RS
d Bore diameter 70 mm
d2 Head diameter 160 mm
B Ball width 49 mm
G Thread size M72×4
C1 Head width 42 mm
α° Tilt angle 6 °
C Basic dynamic load rating 313 kN
C0 Basic static load rating 610 kN
GIL70-1UK-2RS
d Bore diameter 70 mm
d2 Head diameter 160 mm
B Ball width 49 mm
G Thread size M72×4
C1 Head width 42 mm
α° Tilt angle 6 °
C Basic dynamic load rating 313 kN
C0 Basic static load rating 470 kN
GIL80-1UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M80×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 400 kN
C0 Basic static load rating 600 kN
GIL80UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M64×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 705 kN
C0 Basic static load rating 750 kN
GAL80UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M64×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 705 kN
C0 Basic static load rating 750 kN
GAL70-1UK-2RS
d Bore diameter 70 mm
d2 Head diameter 160 mm
B Ball width 49 mm
G Thread size M72×4
C1 Head width 42 mm
α° Tilt angle 6 °
C Basic dynamic load rating 313 kN
C0 Basic static load rating 610 kN
GAL80-1UK-2RS
d Bore diameter 80 mm
d2 Head diameter 180 mm
B Ball width 55 mm
G Thread size M80×4
C1 Head width 47 mm
α° Tilt angle 6 °
C Basic dynamic load rating 400 kN
C0 Basic static load rating 750 kN
MXML16
d Bore diameter 16 mm
d2 Head diameter 38 mm
B Ball width 21 mm
G Thread size M16X2.0
C1 Head width 14.25 mm
α° Tilt angle 23 °
C Basic dynamic load rating
C0 Basic static load rating 97.71 kN
MXML14
d Bore diameter 14 mm
d2 Head diameter 34.75 mm
B Ball width 19 mm
G Thread size M14X2.0
C1 Head width 13.5 mm
α° Tilt angle 21 °
C Basic dynamic load rating
C0 Basic static load rating 90.38 kN
MXML12
d Bore diameter 12 mm
d2 Head diameter 30 mm
B Ball width 16 mm
G Thread size M12X1.75
C1 Head width 12 mm
α° Tilt angle 17 °
C Basic dynamic load rating
C0 Basic static load rating 68.14 kN
MXML10
d Bore diameter 10 mm
d2 Head diameter 27 mm
B Ball width 14 mm
G Thread size M10X1.5
C1 Head width 10.5 mm
α° Tilt angle 17 °
C Basic dynamic load rating
C0 Basic static load rating 52.47 kN
MXML8
d Bore diameter 8 mm
d2 Head diameter 22.25 mm
B Ball width 12 mm
G Thread size M8X1.25
C1 Head width 8.75 mm
α° Tilt angle 18 °
C Basic dynamic load rating
C0 Basic static load rating 33.11 kN
MXML6
d Bore diameter 6 mm
d2 Head diameter 19 mm
B Ball width 9 mm
G Thread size M6X1.0
C1 Head width 7 mm
α° Tilt angle 13 °
C Basic dynamic load rating
C0 Basic static load rating 18.18 kN
Bore diameter
d
10 mm
Head diameter
d2
28 mm
Ball width
B
14 mm
Thread size
G
M10x1.25
Head width
C1
10.5 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
18 kN
Basic static load rating
C0
18.5 kN
Bore diameter
d
5 mm
Head diameter
d2
18 mm
Ball width
B
8 mm
Thread size
G
M5x0.8
Head width
C1
6 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
6 kN
Basic static load rating
C0
9.18 kN
Bore diameter
d
5 mm
Head diameter
d2
18 mm
Ball width
B
8 mm
Thread size
G
M5x0.8
Head width
C1
6 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
6 kN
Basic static load rating
C0
9.18 kN
Bore diameter
d
5 mm
Head diameter
d2
18 mm
Ball width
B
8 mm
Thread size
G
M4x0.7
Head width
C1
6 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
6 kN
Basic static load rating
C0
9.18 kN
Bore diameter
d
6 mm
Head diameter
d2
20 mm
Ball width
B
9 mm
Thread size
G
M6x1
Head width
C1
6.75 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
7.65 kN
Basic static load rating
C0
8 kN
Bore diameter
d
8 mm
Head diameter
d2
24 mm
Ball width
B
12 mm
Thread size
G
M8x1.25
Head width
C1
9 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
12.9 kN
Basic static load rating
C0
13.1 kN
Bore diameter
d
10 mm
Head diameter
d2
28 mm
Ball width
B
14 mm
Thread size
G
M10x1.5
Head width
C1
10.5 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
18 kN
Basic static load rating
C0
18.5 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M80×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
400 kN
Basic static load rating
C0
600 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M64×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
705 kN
Basic static load rating
C0
750 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M64×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
705 kN
Basic static load rating
C0
750 kN
Bore diameter
d
50 mm
Head diameter
d2
112 mm
Ball width
B
35 mm
Thread size
G
M52×3
Head width
C1
30 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
156 kN
Basic static load rating
C0
260 kN
Bore diameter
d
60 mm
Head diameter
d2
135 mm
Ball width
B
44 mm
Thread size
G
M60×4
Head width
C1
38 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
245 kN
Basic static load rating
C0
300 kN
Bore diameter
d
60 mm
Head diameter
d2
135 mm
Ball width
B
44 mm
Thread size
G
M52×3
Head width
C1
38 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
430 kN
Basic static load rating
C0
450 kN
Bore diameter
d
70 mm
Head diameter
d2
160 mm
Ball width
B
49 mm
Thread size
G
M72×4
Head width
C1
42 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
313 kN
Basic static load rating
C0
470 kN
Bore diameter
d
70 mm
Head diameter
d2
160 mm
Ball width
B
49 mm
Thread size
G
M56×4
Head width
C1
42 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
550 kN
Basic static load rating
C0
610 kN
Bore diameter
d
70 mm
Head diameter
d2
160 mm
Ball width
B
49 mm
Thread size
G
M56×4
Head width
C1
42 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
550 kN
Basic static load rating
C0
610 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M64×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
705 kN
Basic static load rating
C0
750 kN
Bore diameter
d
70 mm
Head diameter
d2
160 mm
Ball width
B
49 mm
Thread size
G
M72×4
Head width
C1
42 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
313 kN
Basic static load rating
C0
610 kN
Bore diameter
d
70 mm
Head diameter
d2
160 mm
Ball width
B
49 mm
Thread size
G
M72×4
Head width
C1
42 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
313 kN
Basic static load rating
C0
470 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M80×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
400 kN
Basic static load rating
C0
600 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M64×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
705 kN
Basic static load rating
C0
750 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M64×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
705 kN
Basic static load rating
C0
750 kN
Bore diameter
d
70 mm
Head diameter
d2
160 mm
Ball width
B
49 mm
Thread size
G
M72×4
Head width
C1
42 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
313 kN
Basic static load rating
C0
610 kN
Bore diameter
d
80 mm
Head diameter
d2
180 mm
Ball width
B
55 mm
Thread size
G
M80×4
Head width
C1
47 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
400 kN
Basic static load rating
C0
750 kN
Bore diameter
d
16 mm
Head diameter
d2
38 mm
Ball width
B
21 mm
Thread size
G
M16X2.0
Head width
C1
14.25 mm
Tilt angle
α°
23 °
Basic dynamic load rating
C
Basic static load rating
C0
97.71 kN
Bore diameter
d
14 mm
Head diameter
d2
34.75 mm
Ball width
B
19 mm
Thread size
G
M14X2.0
Head width
C1
13.5 mm
Tilt angle
α°
21 °
Basic dynamic load rating
C
Basic static load rating
C0
90.38 kN
Bore diameter
d
12 mm
Head diameter
d2
30 mm
Ball width
B
16 mm
Thread size
G
M12X1.75
Head width
C1
12 mm
Tilt angle
α°
17 °
Basic dynamic load rating
C
Basic static load rating
C0
68.14 kN
Bore diameter
d
10 mm
Head diameter
d2
27 mm
Ball width
B
14 mm
Thread size
G
M10X1.5
Head width
C1
10.5 mm
Tilt angle
α°
17 °
Basic dynamic load rating
C
Basic static load rating
C0
52.47 kN
Bore diameter
d
8 mm
Head diameter
d2
22.25 mm
Ball width
B
12 mm
Thread size
G
M8X1.25
Head width
C1
8.75 mm
Tilt angle
α°
18 °
Basic dynamic load rating
C
Basic static load rating
C0
33.11 kN
Bore diameter
d
6 mm
Head diameter
d2
19 mm
Ball width
B
9 mm
Thread size
G
M6X1.0
Head width
C1
7 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
Basic static load rating
C0
18.18 kN
Series

C&H manufactures maintenance-free rod ends with three different sliding contact surface combinations in different series:
• Steel/PTFE composite:
– GIKR(L) .. PW series
– GAKR(L).. PW series
– GIKR(L) .. PS series
– GAKR(L).. PS series
– SI(L) .. C series / GIR(L)..UK series
– SA(L) .. C series / GAR(L)..UK series
• Steel/PTFE fabric:
– SI(L) .. TXE-2RS series / GIR(L)..UK-2RS series
– SI(L)A .. TXE-2RS series
– SA(L) .. TXE-2RS series / GAR(L)..UK-2RS series
– SA(L)A .. TXE-2RS series
• Steel/PTFE Plastic :
– SI(L)KB .. F series
– SA(L)KB .. F series

Dimensions

The dimensions of C&H maintenance-free rod ends are in accordance with ISO 12240-4:1998.
Male and female threads of C&H rod ends are in accordance with ISO 965-1:1998.
Female rod ends having a fine pitch thread is in accordance with ISO 8139:2009.
Series GIKPR..-PW and GIKPSR..-PS has a fine pitch thread connector for standard pneumatic cylinders to DIN ISO 15552 (right hand thread only).

Tolerance and Clearance

Tolerance 

C&H rod end inner ring dimensional tolerances are in accordance with ISO 12240-1:1998. The tolerances are listed in table 1.
The symbols used in table 1 are explained in the following:
d           nominal bore diameter
Δdmp   deviation of the mean bore diameter from the nominal
ΔBs       deviation of the single inner ring width from the nominal

Inner ring dimensional tolerances for maintenance-free rod ends 

 

Clearance

Radial internal clearance, preload Depending on their design, maintenance-free rod ends may have a radial internal clearance or a light preload. Table 2 lists maximum values for the radial internal clearance as well as for the frictional moment in the circumferential direction caused by preload.

Radial internal clearance and frictional moment for maintenance-free rod ends

 

111

ISO CERTIFICATE
ABOUT US
CONTACT US
SOCIAL MEDIAS
MOBILE APPS
©Copyright 2022 C&H Bearing, All Rights Reserved Terms of use Privacy Policy SITEMAP
C&H BEARING WEBSITE
×